Here’s the deal …
Sometimes we get a return because someone bought the wrong model for their blades. We have inspected these units and made sure they are fully functional. They may have a mark or 2 on them. We don’t want to sell something as new if that’s not 100% the case. So we will sell these at a discount under our full warranty. But please note that no returns will be accepted unless it is due to a defect. Please be confident that the model you choose will handle the angle(s) you need for your mower blades before making your purchase.
What You Will Need For All Models
4.5″ Angle Grinder (Ex. Dewalt DWE4011)
4.5″ 36 to 60 Grit Flap Disc (Suggested)
A Solid Work Space to Mount or Clamp Your Jig
What Is Included With All Models
Four Different Adapter Pins (M8x1.25, 5/16-18, M10x1.5, 3/8-16) These pins work with almost any grinder between 4-5 inches.
One 45 Degree Bench Mount (2 machine screws to attach sharpener to mount are included. You will need to provide your own screws to mount the bracket to your mounting surface.)*
Capabilities Of All Models
Vise will clamp 1 3/4″ – 3 1/4″ wide blades
Thickness up to .28″ (standard configuration)**
Blades can be as long as 30″
Our sharpeners work with most mower blades, but not all. We strongly recommend you take the time to review the information on our Blade Guide page before making a purchase. It is important to understand the angles of your mower blade(s) to make sure you choose the correct model for your setup.
Refurbished All American Sharpener
* The bracket is 1/4" thick stainless steel. The 3/8" diameter holes are 1" apart.
** You can safely back the mounting screws out 3 times at the max to accommodate a slightly thicker blade
Looking for Mower Blades?
These professional-grade replacement blades are made right here in Northwest Ohio.